Skip to product information
Kanto Audio TUK G2 + OBI3 Gen 2 + SX 22 Vinyl Setup – Speaker Finish Matte Black, Turntable Finish Black
  • Kanto Audio TUK G2 + OBI3 Gen 2 + SX 22 Vinyl Setup – Speaker Finish Matte Black, Turntable Finish Black
Kanto Audio TUK G2 + OBI3 Gen 2 + SX 22 Vinyl Setup
Save €148,99
Kanto Audio
New

Kanto Audio TUK G2 + OBI3 Gen 2 + SX 22 Vinyl Setup

  • TUK G2: AMT tweeter, 130 W RMS
  • OBI3 Gen 2 with speed sensor
  • Phono input, no amp needed
  • SX 22 steel floor stands
  • Matching finishes across the set
€1.249,00
€1.249,00 €1.397,99
VAT included • B2B ex VAT
i
Speaker FinishMatte Black
Turntable FinishBlack
Sold out

Notify me when available

This item ships on backorder. Leave your email and tell us when you need it — we'll get back to you with an accurate delivery date and let you know the moment it ships.

Kanto Audio TUK G2 + OBI3 Gen 2 + SX 22 Vinyl Setup €1.249,00

No spam — we'll only use this to follow up on your request.
Pay in installments Klarna
  • 3 × €416,33 Interest-free · 18+, T&C apply
Buy in installments
In this bundle 3 products
Bought separately: €1.397,99 You save €148,99
Free shipping
Free delivery over €149, or €4 to a pickup point. Arrives in 3–5 business days. Learn more
Ships when available
Not in our local stock right now — order it and we'll dispatch it as soon as it arrives. Check the stock badge above for the latest timing. Learn more
Price match
Found it cheaper elsewhere? We'll match the price. Learn more
Martyna Need advice?Our experts are here We usually answer the hotline 10:00–18:00 (lunch 13:30–14:30). If we miss you — sorry, we're human. For simple questions we usually reply within a couple of hours.

Kanto Audio TUK G2 + OBI3 Gen 2 + SX 22 – A Complete Kanto Vinyl System

Kanto Audio builds the pieces of a small hi-fi to work with each other, and this set is the proof: the TUK G2 powered speakers with their AMT tweeter and built-in phono stage, the OBI3 Gen 2 belt-drive turntable with speed sensor and auto-stop, and the SX 22 floor stands that put the TUK at listening height. Turntable into speakers, speakers onto stands, done.

In This Setup

  • Kanto Audio TUK G2 (pair) – powered speakers with 28 x 35 mm AMT tweeter, 5.25-inch Aircomb aluminium woofer, 130 W RMS Class D with DSP, phono input. Matte Black, Matte White or Matte Walnut.
  • Kanto Audio OBI3 Gen 2 – belt-drive turntable with platter speed sensor, auto-stop, 5.5 kg damped chassis and Bluetooth output. Black, White or Walnut.
  • Kanto Audio SX 22" (pair) – 55.9 cm heavy-gauge steel floor stands, fillable columns, interchangeable top plates, spiked feet. Black.

Why This Combination

  • No amplifier in the chain: the TUK G2 phono input takes the OBI3 Gen 2 directly.
  • Stands that fit the cabinet: the SX 22 top plates are sized for the TUK footprint.
  • Finishes across the set: Black, White or Walnut on turntable and speakers.

Set price includes all three products.
Deck, speakers, stands.

Deck, speakers, stands.

A Kanto turntable with its own phono preamp, AMT-loaded active speakers and the steel stands that hold them at ear height.

The TUK G2 has no phono input, and it does not need one here: the OBI3 Gen 2 carries a switchable phono preamp, so one RCA cable between the two is the whole signal chain. The speakers supply the amplification, the DAC and the Bluetooth, and the SX 22 stands lift them to 55.9 cm and can be filled for mass. It is a full analogue system for a living room, with nothing left to specify.

  • Phono preamp built into the deck
  • 130 W RMS active speakers
  • AMT tweeter
  • Fillable steel stands
  • Bluetooth at both ends
Kanto Audio OBI3 Gen 2 turntable, Black, in a living-room hi-fi setup
Kanto Audio OBI3 Gen 2 turntable, Walnut, tonearm and speed controls detail
Kanto Audio OBI3 Gen 2 turntable, Black, rear connections
Kanto Audio OBI3 Gen 2 turntable, Walnut, in a home setting
The turntable

Kanto Audio OBI3 Gen 2

A belt-drive deck with a platter speed sensor that measures rotation and corrects it as the record plays, plus an auto-stop that halts the platter at the end of a side. An Audio-Technica AT3600L is fitted and aligned at the factory, and the switchable phono preamp means it can feed a line input directly. Bluetooth 5.3 is there when the cable is not.

  • Belt drive with a platter speed sensor for steady 33 1/3 and 45 rpm
  • Auto-stop at the end of a record, with a manual cue lever
  • Switchable phono preamp on the RCA output
  • Audio-Technica AT3600L moving-magnet cartridge, pre-installed
  • J-style aluminium tonearm with adjustable counterweight and anti-skate
Specifications
DriveBelt drive with platter speed sensor
Speeds33 1/3 and 45 rpm, pitch plus or minus 10%
CartridgeAudio-Technica AT3600L (MM, fitted)
Phono stageBuilt in, switchable
WirelessBluetooth 5.3
Wow and flutterUnder 0.15% WRMS (DIN weighted)
Dimensions43.2 x 36.3 x 12.4 cm
Weight5.5 kg
View product
Kanto Audio TUK G2 in Matte Burl on a speaker stand in a living room next to a turntable
Kanto Audio TUK G2 in Matte Black, rear view with RCA, USB-C, optical inputs and subwoofer output
Kanto Audio TUK G2 close-up of the 5.25-inch Aircomb aluminum woofer in Matte Black
Kanto Audio TUK G2 in Matte White on a sideboard with desktop stands against a green wall
The speakers

Kanto Audio TUK G2

The second-generation TUK pairs a 28 x 35 mm AMT tweeter with a 5.25-inch aluminium Aircomb woofer and 130 W RMS of Class D power with DSP. Everything an amplifier and DAC would do happens inside the active cabinet, so a source, a power cable and one input is the entire system. A selectable 80 Hz crossover lets the pair hand the low end to a subwoofer later.

  • 130 W total RMS and 260 W peak, Class D with DSP
  • 28 x 35 mm AMT tweeter in a waveguide, 5.25-inch aluminium woofer
  • Two RCA line inputs, USB-C and optical at 24-bit/96 kHz
  • Bluetooth 5.4 with aptX Adaptive, AAC and SBC
  • Selectable 80 Hz crossover with subwoofer output
Specifications
Amplification130 W RMS / 260 W peak, Class D with DSP
Drivers28 x 35 mm AMT tweeter, 5.25 in aluminium woofer
Frequency response50 Hz - 22 kHz
Inputs2 x RCA line, USB-C, optical, Bluetooth 5.4
Bluetooth codecsaptX Adaptive, AAC, SBC
OutputsSub out, USB charge 5 V / 2 A
Dimensions (each)18.4 x 25.4 x 30.5 cm
Weight5.6 kg active, 5.2 kg passive
View product
Kanto Audio SX 22-inch speaker stand supporting a speaker in a living room setting with a couch.
Kanto Audio SX 22-inch speaker stands for supporting and elevating audio speakers in a home or studio setup.
Kanto Audio SX 22-inch speaker stands supporting audio speakers, showcasing sturdy black metal construction and adjustable height.
Kanto Audio SX 22-inch speaker stands supporting audio speakers on a flat surface.
The stands

Kanto Audio SX 22

Heavy-gauge steel stands at 22 inches, which puts a TUK G2 tweeter close to seated ear height. The column is hollow and comes with fill bags, so mass can be added where the room needs it, and a dedicated channel takes the mains and link cables down through the base. Two top plate widths are supplied, along with spikes and silicone discs for either floor type.

  • 22 in (55.9 cm) height in heavy-gauge steel
  • Fillable column with two fill bags and zip ties included
  • Two top plate sizes: 5.2 in and 6.5 in wide
  • 8 spiked isolation feet and 8 silicone floor protectors
  • Dedicated cable channel through the column and base
Specifications
Height22 in (55.9 cm)
MaterialHeavy-gauge steel, fillable column
Top plates2 x 5.2 in and 2 x 6.5 in wide
Maximum load30 lb (13.6 kg) per stand
IsolationSpiked feet and silicone floor protectors
Cable managementDedicated internal channel
Also includedFoam pads, fill bags, levelling bubble
Sold asPair
View product

Key technologies

  • AMT tweeter
  • Class D with DSP
  • Bluetooth 5.4 aptX Adaptive
  • Bluetooth 5.3
  • USB-C 24-bit/96 kHz
  • Switchable phono preamp
  • Platter speed sensor

Setting it up

  1. Assemble the SX 22 stands, fit the top plate that matches the TUK G2 footprint, and fill the columns if the floor is bouncy.
  2. Set the OBI3 Gen 2 on a level surface away from the speakers, fit the platter, belt and slip mat, and remove the stylus guard.
  3. Switch the OBI3 Gen 2 output to line so the built-in phono preamp is active, then run RCA from the deck to a TUK G2 line input.
  4. Join the two speakers with the supplied speaker wire, route the cables down the stand columns and connect mains power.
  5. Select the input on the remote, set the volume low and cue the record with the lever.

Questions

Does the TUK G2 have a phono input?

No. Its two RCA inputs are line level only, which is why the OBI3 Gen 2 in this set has its own switchable phono preamp.

Do I need an amplifier?

No. The TUK G2 is active, with 130 W RMS of Class D power and DSP inside the cabinet.

Which cable connects the deck to the speakers?

A standard RCA-to-RCA cable, supplied with the OBI3 Gen 2, from the deck's output set to line into either TUK G2 RCA input.

Can I play records wirelessly?

Yes. The OBI3 Gen 2 transmits over Bluetooth 5.3 and the TUK G2 receives over Bluetooth 5.4, although a cable keeps the signal path shorter.

Will the stands hold the speakers?

Comfortably. Each SX 22 is rated to 30 lb (13.6 kg) and an active TUK G2 weighs 5.6 kg.

Does the OBI3 Gen 2 play 78s?

No. It runs 33 1/3 and 45 rpm, with plus or minus 10% pitch adjustment.

Can I add a subwoofer?

Yes. The TUK G2 has a subwoofer output and a selectable 80 Hz crossover, so the mains can be relieved of the deepest bass.

What warranty does Kanto give?

Kanto's limited warranty runs 24 months from the date of shipment, with proof of purchase from an authorised reseller.

Compare
Reviews
You may also like