Warm Audio WA-RA front three-quarter view

Warm Audio WA-RA

€499,00
€499,00
Saltar para a informação do produto
Warm Audio WA-RA front three-quarter view
  • Warm Audio WA-RA front three-quarter view
  • Warm Audio WA-RA Reamper in a studio setup
  • Warm Audio WA-RA front panel
  • Warm Audio WA-RA rear connectors
  • Warm Audio WA-RA controls detail
  • Warm Audio WA-RA rear panel in use
  • Warm Audio Reamper Full Product Overview
  • Warm Audio WA-RA front three-quarter view
  • Warm Audio WA-RA Reamper in a studio setup
  • Warm Audio WA-RA front panel
  • Warm Audio WA-RA rear connectors
  • Warm Audio WA-RA controls detail
  • Warm Audio WA-RA rear panel in use
  • Warm Audio Reamper Full Product Overview
Warm Audio WA-RA
Warm Audio

Warm Audio WA-RA

Ainda sem avaliações · Sê o primeiro a avaliar →
€499,00
€499,00
IVA incluído
i
Armazém do fornecedor · 3+ un.

Quando vou receber este artigo?

Este artigo está no armazém do nosso fornecedor — trazemo-lo o mais rapidamente possível. Normalmente demora 1–2 semanas, por vezes mais cedo e por vezes um pouco mais. Deixe o seu email e diga-nos até quando precisa dele — confirmaremos uma data de entrega mais precisa e, se necessário, encomendá-lo-emos ao fornecedor com prioridade.

Warm Audio WA-RA €499,00

Sem spam — usaremos isto apenas para responder ao seu pedido.
Em prestações · 3× €166,33 0% juros, sem taxas Opções de pagamento
Envio grátis
Envio grátis acima de €149 ou €4 para um ponto de recolha. Chega em 3–5 dias úteis. Saber mais
Enviado quando estiver disponível
De momento não está no nosso stock local — encomende-o e enviaremos assim que chegar. Consulte a etiqueta de stock acima para o prazo mais recente. Saber mais
Devoluções em 30 dias
Não é o que procuravas? Devolve em 30 dias e recebe o reembolso total. Saber mais
3 anos de garantia
Todos os produtos incluem a garantia padrão do fabricante. Prolonga a garantia
Garantia de preço
Encontraste mais barato noutro sítio? Igualamos o preço. Saber mais
Vincas Precisas de aconselhamento?Os nossos especialistas estão aqui Atendemos normalmente na linha direta das 10:00 às 18:00 (almoço 13:30–14:30). Se não atendermos — desculpe, somos humanos. A perguntas simples respondemos normalmente dentro de algumas horas.

Warm Audio WA-RA – All-Analog Re-Amping and Routing Hub

The WA-RA Reamper is Warm Audio's all-analog signal conversion hub for the studio, built to push dry DI tracks back out to amps and pedals and to record loud tube amps in near silence. Two independent signal paths, CineMag transformers and a built-in power soak make it a flexible routing centrepiece for guitar-driven production at Soundium.

Key Features

  • Independent preamp and re-amp paths: Reamp a dry DI track and capture a fresh DI in the same pass, with no repatching.
  • CineMag USA transformers: A custom transformer in each signal path keeps tone and impedance behaving like a real instrument feed.
  • Variable input impedance (120 kΩ to 1 MΩ): Dial in the right load for passive guitars, active pickups, pedals or line sources.
  • Switchable JFET / Op-Amp input stage: Choose a warmer JFET character or a cleaner Op-Amp gain structure per track.
  • Built-in 50 W power soak: Record a cranked 8 Ω tube amp silently, with no cabinet in the room.
  • Per-channel polarity and ground-lift switches: Kill hum, buzz and phase problems when tying rigs and the DAW together.

Customer Benefits

The WA-RA turns re-amping from a cable-juggling chore into a single hub on your desk. Send a clean DI back through your favourite amp or pedalboard, commit a tone, then change your mind tomorrow without re-tracking the performance. The power soak lets you chase real tube saturation at any hour, and the dual paths mean you can reamp and re-capture at once. It is a dependable, studio-grade tool backed by Soundium support.

Quick Specs

  • Type: All-analog re-amping and signal-routing hub with power soak
  • Transformers: Custom CineMag USA, one per signal path
  • Input impedance: Variable, 120 kΩ to 1 MΩ
  • Max instrument input: +18 dBu (6 VRMS)
  • Power soak: 8 Ω, 50 W maximum
  • Connections: Balanced XLR and 6.35 mm line in/out, Instrument In/Thru/Out, Amp In/Thru
  • Controls: JFET/Op-Amp input switch, polarity inversion, per-channel ground lift
  • Power: 90 to 240 V AC, 50 to 60 Hz
  • Dimensions: 7 × 16.2 × 10.7 cm
  • Weight: 1.65 kg

What's in the Box

  • Warm Audio WA-RA Reamper
  • IEC mains power cable
  • User manual and documentation

Ideal For

Re-amping dry guitar and bass DIs, silent tube-amp recording, and routing line and instrument signals between your DAW, pedals and outboard.

Compatibility

Works with passive and active instruments, keyboards, pedals and line-level sources, and connects to amps, mixers and interfaces over balanced XLR or 6.35 mm jacks. The built-in power soak handles tube amps up to 50 W into 8 Ω.

Pros & Cons

✅ Pros:

  • Two independent paths reamp and re-capture in a single pass
  • Built-in 50 W power soak for silent tube-amp tracking
  • CineMag transformers and variable impedance preserve real instrument tone

⚠️ Cons:

  • 50 W soak ceiling, so it is not suited to high-wattage 100 W heads
  • More routing depth than a one-knob reamp box, so there is a short learning curve

From committing a reamped tone to tracking a screaming amp in a quiet room, the Warm Audio WA-RA brings analog re-amping and routing into one box. Find the WA-RA Reamper at Soundium.
Também pode gostar de