Warm Audio WA-RA front three-quarter view

Warm Audio WA-RA

€499,00
€499,00
Hoppa till produktinformation
Warm Audio WA-RA front three-quarter view
  • Warm Audio WA-RA front three-quarter view
  • Warm Audio WA-RA Reamper in a studio setup
  • Warm Audio WA-RA front panel
  • Warm Audio WA-RA rear connectors
  • Warm Audio WA-RA controls detail
  • Warm Audio WA-RA rear panel in use
  • Warm Audio Reamper Full Product Overview
  • Warm Audio WA-RA front three-quarter view
  • Warm Audio WA-RA Reamper in a studio setup
  • Warm Audio WA-RA front panel
  • Warm Audio WA-RA rear connectors
  • Warm Audio WA-RA controls detail
  • Warm Audio WA-RA rear panel in use
  • Warm Audio Reamper Full Product Overview
Warm Audio WA-RA
Warm Audio

Warm Audio WA-RA

Inga recensioner än · Bli först med att recensera →
€499,00
€499,00
Moms ingår
i
Leverantörslager · 3+ st.

När får jag den här varan?

Den här varan finns i vår leverantörs lager — vi tar hem den så snabbt vi kan. Det tar oftast 1–2 veckor, ibland snabbare och ibland lite längre. Lämna din e-postadress och berätta när du behöver den — vi bekräftar ett mer exakt leveransdatum och beställer den vid behov med förtur från vår leverantör.

Warm Audio WA-RA €499,00

Ingen spam — vi använder detta endast för att svara på din förfrågan.
Dela upp · 3× €166,33 0% ränta, inga avgifter Betalningsalternativ
Fri frakt
Fri frakt över €149 eller €4 till ett utlämningsställe. Levereras på 3–5 vardagar. Läs mer
Skickas när den finns tillgänglig
Inte i vårt lokala lager just nu — beställ den så skickar vi den så snart den kommer in. Se lagermärkningen ovan för den senaste tidsangivelsen. Läs mer
30 dagars öppet köp
Passar den inte? Returnera inom 30 dagar och få full återbetalning. Läs mer
3 års garanti
Varje produkt inkluderar tillverkarens standardgaranti. Förläng din garanti
Prismatchning
Hittat billigare någon annanstans? Vi matchar priset. Läs mer
Martyna Behöver du råd?Våra experter finns här Vi svarar vanligtvis i telefon 10:00–18:00 (lunch 13:30–14:30). Om vi missar dig — förlåt, vi är bara människor. På enkla frågor svarar vi vanligtvis inom ett par timmar.

Warm Audio WA-RA – All-Analog Re-Amping and Routing Hub

The WA-RA Reamper is Warm Audio's all-analog signal conversion hub for the studio, built to push dry DI tracks back out to amps and pedals and to record loud tube amps in near silence. Two independent signal paths, CineMag transformers and a built-in power soak make it a flexible routing centrepiece for guitar-driven production at Soundium.

Key Features

  • Independent preamp and re-amp paths: Reamp a dry DI track and capture a fresh DI in the same pass, with no repatching.
  • CineMag USA transformers: A custom transformer in each signal path keeps tone and impedance behaving like a real instrument feed.
  • Variable input impedance (120 kΩ to 1 MΩ): Dial in the right load for passive guitars, active pickups, pedals or line sources.
  • Switchable JFET / Op-Amp input stage: Choose a warmer JFET character or a cleaner Op-Amp gain structure per track.
  • Built-in 50 W power soak: Record a cranked 8 Ω tube amp silently, with no cabinet in the room.
  • Per-channel polarity and ground-lift switches: Kill hum, buzz and phase problems when tying rigs and the DAW together.

Customer Benefits

The WA-RA turns re-amping from a cable-juggling chore into a single hub on your desk. Send a clean DI back through your favourite amp or pedalboard, commit a tone, then change your mind tomorrow without re-tracking the performance. The power soak lets you chase real tube saturation at any hour, and the dual paths mean you can reamp and re-capture at once. It is a dependable, studio-grade tool backed by Soundium support.

Quick Specs

  • Type: All-analog re-amping and signal-routing hub with power soak
  • Transformers: Custom CineMag USA, one per signal path
  • Input impedance: Variable, 120 kΩ to 1 MΩ
  • Max instrument input: +18 dBu (6 VRMS)
  • Power soak: 8 Ω, 50 W maximum
  • Connections: Balanced XLR and 6.35 mm line in/out, Instrument In/Thru/Out, Amp In/Thru
  • Controls: JFET/Op-Amp input switch, polarity inversion, per-channel ground lift
  • Power: 90 to 240 V AC, 50 to 60 Hz
  • Dimensions: 7 × 16.2 × 10.7 cm
  • Weight: 1.65 kg

What's in the Box

  • Warm Audio WA-RA Reamper
  • IEC mains power cable
  • User manual and documentation

Ideal For

Re-amping dry guitar and bass DIs, silent tube-amp recording, and routing line and instrument signals between your DAW, pedals and outboard.

Compatibility

Works with passive and active instruments, keyboards, pedals and line-level sources, and connects to amps, mixers and interfaces over balanced XLR or 6.35 mm jacks. The built-in power soak handles tube amps up to 50 W into 8 Ω.

Pros & Cons

✅ Pros:

  • Two independent paths reamp and re-capture in a single pass
  • Built-in 50 W power soak for silent tube-amp tracking
  • CineMag transformers and variable impedance preserve real instrument tone

⚠️ Cons:

  • 50 W soak ceiling, so it is not suited to high-wattage 100 W heads
  • More routing depth than a one-knob reamp box, so there is a short learning curve

From committing a reamped tone to tracking a screaming amp in a quiet room, the Warm Audio WA-RA brings analog re-amping and routing into one box. Find the WA-RA Reamper at Soundium.
Du kanske också gillar