Preskoči do informacija o proizvodu
Argon Audio TT-3 + Fenris A4 + Kontur 10 Vinyl Starter Setup – Turntable Finish Black, Speaker Finish Black
  • Argon Audio TT-3 + Fenris A4 + Kontur 10 Vinyl Starter Setup – Turntable Finish Black, Speaker Finish Black
Argon Audio TT-3 + Fenris A4 + Kontur 10 Vinyl Starter Setup
Uštedi €98,00
Argon Audio
New

Argon Audio TT-3 + Fenris A4 + Kontur 10 Vinyl Starter Setup

  • Belt-drive with Ortofon OM5E
  • Active speakers with phono input
  • Desktop stands included
  • HDMI ARC + Bluetooth 5.0
  • First vinyl system, set price
€749,00
€749,00 €847,00
PDV uključen • B2B bez PDV-a
i
Turntable Finish
Speaker Finish
Dostupno na narudžbu

Obavijesti me kad bude dostupno

Ovaj se proizvod isporučuje po narudžbi. Ostavite svoju e-poštu i recite nam kada vam je potreban — javit ćemo se s točnim datumom isporuke i obavijestiti vas čim bude poslan.

Argon Audio TT-3 + Fenris A4 + Kontur 10 Vinyl Starter Setup €749,00

Bez neželjene pošte — koristit ćemo je samo za odgovor na vaš upit.
Plati na rate Klarna
  • 3 × €249,66 Bez kamata · 18+, vrijede uvjeti
Pogledaj rate
Modeli / Alternative
Argon Audio TT-3 + Fenris A4 + Kontur 10 Vinyl Starter SetupArgon Audio TT-3 + Fenris A4 + Kontur 10 Vinyl Starter Setup Argon Audio AURORA + Forte A5 MK2 Active Vinyl SetupArgon Audio AURORA + Forte A5 MK2 Active Vinyl Setup
Besplatna dostava
Besplatna dostava iznad €149 ili €4 do paketomata. Stiže za 3–5 radnih dana. Saznaj više
Šaljemo čim bude dostupno
Trenutačno nije na našem lokalnom skladištu — naruči ga i poslat ćemo ga čim stigne. Najnovije vrijeme provjeri na oznaci zalihe iznad. Saznaj više
Jamstvo cijene
Našao si jeftinije drugdje? Izjednačit ćemo cijenu. Saznaj više
Vincas Trebaš savjet?Naši stručnjaci su tu Obično odgovaramo na vrućoj liniji od 10:00 do 18:00 (ručak 13:30–14:30). Ako vas ne uhvatimo — ispričavamo se, samo smo ljudi. Na jednostavna pitanja obično odgovaramo unutar nekoliko sati.

Argon Audio TT-3 + Fenris A4 + Kontur 10 – The First Vinyl System, Done Right

A belt-drive turntable with a real Ortofon cartridge, a pair of compact active speakers with a phono input, and the desktop stands that angle them at your ears. This is the starter set we put together for a desk, a bedroom or a first flat: three Scandinavian-designed pieces, nothing to configure, and Bluetooth and TV ARC on the speakers for everything that is not vinyl.

In This Setup

  • Argon Audio TT-3 – belt-driven turntable with aluminium tonearm and pre-mounted Ortofon OM5E cartridge. Black, White or Ash.
  • Argon Audio Fenris A4 (pair) – compact active speakers with MM phono input, HDMI ARC, Bluetooth 5.0 and four-channel Class D amplification with DSP. Black, White or Ash.
  • Essentials Kontur 10 (pair) – powder-coated steel desktop stands with damping pad and cable management, compatible with Fenris A4. Black.

Why This Combination

  • Phono stage on board: the TT-3 connects straight to the Fenris A4 – no extra box.
  • Stands are not optional: the Kontur 10 lifts and tilts the Fenris A4 so the tweeter points at you, not at the desk.
  • Finishes that match: Black, White or Ash on both turntable and speakers.

Set price includes all three products.
A first system, complete.

A first system, complete.

Belt-drive Argon deck, active Argon speakers with a phono input, and the desk stands that lift them clear.

The TT-3 has no phono stage of its own, so it is matched here to a speaker that does. The Fenris A4 carries an MM phono input, HDMI ARC and Bluetooth behind its own amplifiers, and the Kontur 10 stands raise the pair off the desk and damp what the furniture would otherwise pass on. It is a complete first vinyl system for a desk, a study or a small living room.

  • No amplifier or phono box needed
  • Ortofon OM5E fitted
  • HDMI ARC for the TV
  • Desk stands included
  • Small footprint
Argon Audio TT-3 turntable, Black finish
Argon Audio TT-3 turntable, White finish
Argon Audio TT-3 turntable, Ash finish
Argon Audio TT-3 turntable in Ash, angled view
The turntable

Argon Audio TT-3

A straightforward belt-drive deck: MDF plinth, 560 g aluminium platter, aluminium arm with an Ortofon OM5E already mounted. There is no RIAA stage inside, which is why it is paired with speakers that have one. Operation is fully manual and the dust cover is in the box.

  • Belt drive with the motor away from the platter, at 33 and 45 rpm
  • 560 g aluminium platter on an MDF plinth
  • Aluminium tonearm, 8.8 in effective length
  • Ortofon OM5E moving-magnet cartridge fitted at the factory
  • Signal-to-noise 67 dB, with dust cover and RCA cable included
Specifications
DriveBelt
Speeds33 1/3 and 45 rpm
CartridgeOrtofon OM5E (MM, fitted)
TonearmAluminium, 8.8 in effective length
PlatterAluminium, 560 g
Phono stageNone - needs an MM phono input
Dimensions42.0 x 35.5 x 12.1 cm
Weight4 kg
Argon Audio Fenris A4 active bookshelf speakers in black, showing the front view with drivers and sleek design.
Argon Audio Fenris A4 active bookshelf speakers with connecting cables, showcasing sleek black design and audio output ports.
Argon Audio Fenris A4 active bookshelf speakers with wood finish and sleek design, ideal for high-quality audio playback.
Argon Audio Fenris A4 active bookshelf speakers in Pine Green finish, lifestyle view.
The speakers

Argon Audio Fenris A4

Compact actives with four amplifier channels inside and a connector for everything a small room needs. The MM phono input is the reason this set works without a separate preamp, and HDMI ARC lets the television share the same pair. Bluetooth 5.0 covers phones, with SBC as the codec.

  • Class D amplification: 2 x 50 W to the woofers, 2 x 25 W to the tweeters
  • 4 in paper-cone woofer with a 0.75 in soft-dome tweeter
  • HDMI ARC, optical, RCA line and MM phono inputs
  • Bluetooth 5.0, up to 24-bit/48 kHz
  • RCA pre-out for a subwoofer, remote and magnetic grilles included
Specifications
Amplification2 x 50 W woofers and 2 x 25 W tweeters, Class D
Drivers4 in paper cone and 0.75 in soft dome
Frequency range52 Hz - 22 kHz, plus or minus 6 dB
InputsHDMI ARC, optical, RCA line, phono MM, Bluetooth 5.0
Bluetooth5.0, SBC, up to 24-bit/48 kHz
OutputPre-out (RCA)
Dimensions (each)24 x 14 x 22 cm
Weight (each)5.5 kg
Essentials Kontur 10 speaker stands in black with adjustable height and sturdy metal construction for optimal audio positioning.
Essentials Kontur 10 speaker stands, black, with adjustable height and sturdy construction for home audio systems.
Essentials Kontur 10 speaker stands in black, sturdy metal construction for elevating and supporting audio speakers.
Essentials Kontur 10 speaker stands in black, designed to elevate and stabilize audio speakers for optimal sound quality.
The stands

Essentials Kontur 10

Desktop stands, 9 cm high, in black powder-coated steel with a vibration-damping foam pad on the top plate. They lift the Fenris A4 clear of the desk and give the cables a route, so the speaker stops using the furniture as a sounding board. Argon lists them as a match for the Fenris and Forte ranges.

  • 9 cm desktop height with a 15 x 21 cm footprint
  • Top plate 122 x 170 mm, base plate 150 x 210 mm
  • Powder-coated steel with a vibration-damping foam pad
  • 15 kg maximum load, against 5.5 kg per Fenris A4
  • Cable management, rubber feet and Velcro pad in the box
Specifications
TypeDesktop speaker stands (pair)
Height9 cm
Top plate122 x 170 mm
Base plate150 x 210 mm
Maximum load15 kg
MaterialPowder-coated steel
Weight3.04 kg
ColourBlack

Key technologies

  • HDMI ARC
  • Bluetooth 5.0
  • MM phono input
  • Class D amplification
  • Belt drive
  • Ortofon OM5E

Setting it up

  1. Unpack the TT-3, fit the platter and belt as the manual shows, and stand it on a level surface away from the speakers.
  2. Run the RCA cable from the TT-3 into the Fenris A4 phono (MM) input and attach the ground wire.
  3. Join the two speakers with the supplied 3 m cable and give the active one mains power.
  4. Set a Kontur 10 under each speaker, on the foam pad, and route the cables through the stand.
  5. Choose the phono input on the remote, set the volume low and lower the stylus by hand.

Questions

Do I need a phono preamp?

Not with these speakers. The TT-3 has no RIAA stage of its own, and the Fenris A4 has a phono (MM) input, so the turntable connects straight to it.

Could I use the TT-3 with a different amplifier later?

Yes, as long as that amplifier has a phono input or you add an external MM phono stage. A line input alone will sound very quiet and thin.

Are the Kontur 10 floor stands?

No. They are desktop stands, 9 cm high, meant for a desk, sideboard or shelf rather than the floor.

Will the stands take the weight?

Yes. Each Kontur 10 is rated to 15 kg and a Fenris A4 weighs 5.5 kg.

Does the Bluetooth support aptX?

No. The Fenris A4 uses Bluetooth 5.0 with SBC, up to 24-bit/48 kHz. For higher-resolution wireless, the Forte range adds aptX HD.

Can the television use the same speakers?

Yes. HDMI ARC connects the TV with one cable and hands volume control to the TV remote.

What size room does this suit?

Small to medium rooms and desks. The Fenris A4 reaches 52 Hz, plus or minus 6 dB, and the pre-out is there if you later add a subwoofer.

Is a cartridge included?

Yes. An Ortofon OM5E moving-magnet cartridge is fitted at the factory, so the deck is ready to play.

Usporedba
Recenzije
Možda će vam se svidjeti i